| Specifications
|
Units |
2S1 |
2S2 |
3V |
4V |
| Table
size
|
| Length x Width |
mm |
1067
x 230 |
1244
x 230 |
1270
x 254 |
1370
x 254 |
| No.of slots |
mm |
3 |
3 |
3 |
3 |
| Width of slots |
mm |
16 |
16 |
16 |
16 |
| Traverses
(Manual)
|
| Longitudinal (X) |
mm |
760 |
760 |
810 |
915 |
| Cross (Y) |
mm |
305 |
305 |
420 |
400 |
| Vertical travel of
knee (Z) |
mm |
330 |
330 |
400 |
450 |
| Ram Travel |
mm |
350 |
350 |
450 |
520 |
| RAm rotation about
vertical axis |
deg |
360 |
360 |
360 |
360 |
| Spindle
Head
|
| Motor Power |
Kw |
2.2 |
2.2 |
2.2 |
2.2 |
| No. of speeds |
|
16 |
16 |
Infinite |
Infinite |
| Range* |
rpm |
70-4620 |
70-4620 |
50-3550 |
50-3550 |
| Head type |
|
Conventional |
Modified |
Stepless |
Stepless |
| Speed change levers |
|
Double |
Single |
Single |
Single |
| Spindle Taper |
|
H30/R8 |
H30/R8 |
H30/R8 |
H30/R8 |
| Quill Travel |
mm |
127 |
127 |
127 |
127 |
| No. of power feeds |
|
3 |
3 |
3 |
3 |
| Feed rates |
mm/rev. |
0.04,
0.08 |
0.04,
0.08 |
0.04,
0.08 |
0.04,
0.08 |
| |
|
0.15 |
0.15 |
0.15 |
0.15 |
| Head Swivel |
|
|
|
|
|
| To left & Right |
deg |
90-0-90 |
90-0-90 |
90-0-90 |
90-0-90 |
| Towards & away
from column |
deg |
45-0-45 |
45-0-45 |
45-0-45 |
45-0-45 |
| Space
Required
|
| Overall width x Overall
depth x Overall height (approx) |
mm |
1800x1600
x2020 |
1800x1600
x2020 |
1800x1600
x2080 |
1800x1600
x2300 |
| Machine
Body
|
| Slideways |
|
XYZ
Dovetail |
XZ Dovetail
Y Sqaure |
X Dovetail
YZ Sqaure |
XZ Dovetail
Y Sqaure |
| Column Type |
|
Hump
Back |
Hump
Back |
Sqaure |
Sqaure |
| Net Weight (approx.) |
kg |
1050 |
1050 |
1350 |
1450 |
| * In each range the low speed
is possible by engaging the back gear while the high speed is
through spindle direct drive. |
 |
| ACCESSORIES |
|
A. STANDARD |
- Electricals to suit AC supply valtage of 415 V,
3Phase, 50 HZ.
- Spindle forward reverse switch & emergency stop.
- Low voltage electrical panel with E.M. contractors
& over load relays for all models.
- Operator's Manual
- Draw Bar
- One shot lube system
- Set of service tools.
|
|
B. OPTIONAL |
- Coolant Equipment (Std in 4V only)
- Machine lamp with bracket
- Digital readout system
- Power drawbar
- Power feeds for table saddle & knee. Traverses
reduce by approx 70mm with power feed.
- Chip Tray
- Horizontal Milling attachment
- Cutter holding devices such as collets, end mill
holders, stub & milling arbors and boring heads.
- Work holding devices such as machine vices with
or without swivel base, angle plates and sine table.
|
|
Specifications are not binding and are subject to modification
and change without notice. The standard and optional accessories
listed are provisional. Final list will be as per our offer. |
|
Rigid. Rugged, Reliable
These high precision turrent ram type milling machines are built
with proven designs, tight engineering standards and quality
materials. In addition o these there are features such as hardened
ways and turcite coating on saddle ways. These make the machines
rigid and reliable. |
| |
